-
Visit Runfeng group
Runfeng group is a science and technology enterprise that produces and sells new energy products such as lithium battery, photovoltaic and inverter.
-
S2 switch
If EV didn't install S2 switch,did it have any other thing to do?
-
Belgium guest visit
Belgium guest visited my company successfully on Mar.7,2018.
-
The London's new communal facilities of charging pile for EV
The London Borough Tower Hamlets has installed the first lamppost chargepoint this week. The snow did not stop it, no earthworks needed!
-
500W 36V 21AH Lithium Battery Pack with Hailong no.2 case and 5A Charger for Electric bicycle
This type of product can be designed according to your demand,use different type of cells for 250W-500W motor.¥ 0.00Buy now
-
25.6V 60Ah lithium battery pack with LiFePO4 cells and PVC packing for street lamp electrical power
This type of lithium battery pack has super long cycle life, high quality, adapt to all kinds of weather changes.¥ 0.00Buy now
-
3.6V 36Ah rechargeable lithium ion battery
This type of rechargeable lithium ion battery can be used for energy storage battery, e-vehicle and other facility.
The case appearance can be customized according to your demand.¥ 0.00Buy now
-
Intelligent electric balance body-touching car
Easy control and have the spraying lamp.
Long battery life.
Intelligent body-touching experience¥ 0.00Buy now
-
3.7V 13Ah lithium battery pack with Panasonic cells and PVC packing for electronic devices
This type of lithium battery can be used in small electronic devices, which can be continuously stabilized, such as a small vacuum cleaner.¥ 0.00Buy now
-
300W 36V 10AH Panasonic 18650B NiCoMn 10S3P Lithium Battery Pack with Haibao no.1 case,tail light and 3A Charger for Electric bicycle
This type of product can be designed according to your demand,use different type of cells for 250W-300W motor.¥ 0.00Buy now
-
12V 9.6Ah lithium battery pack with ABS case for electric vehicle,solar system
This type of lithium battery uses the 26650 LiFePO4 cells with 3300mAh, which is small in size and easy to use in series and parallel.
And use safety, discharge stability, cooperate with BMS to use, it is a modified electric vehicle's choice.¥ 0.00Buy now
-
500W 36V 16AH Panasonic 18650B NiCoMn 10S5P Lithium Battery Pack with water bottle case and 3A Charger for Electric bicycle
This type of product can be designed according to your demand,use different type of cells for 250W-500W motor.¥ 0.00Buy now
-
250W 36V 16.5AH lithium Battery pack for electric scooter with PVC packing
This type of lithium battery pack can be applied to the limited space of space, which requires special design of electric vehicle, electric two-wheel and tricycle, safety protection, long discharge time, convenient maintenance.¥ 0.00Buy now
-
500W 48V 20AH lithium Battery pack for electric scooter with PVC packing,two 48V 10Ah batterys in parallel
This type of lithium battery pack can be applied to the limited space of space, which requires special design of electric vehicle, electric two-wheel and tricycle, safety protection, long discharge time, convenient maintenance.¥ 0.00Buy now
-
30KW智能直流充电桩
30KW智能直流充电桩可对国内市场电动汽车进行持续低于100A充电¥ 0.00Buy now
-
EV Wall-mounted WIFI 22KW AC 400V 32A charging pile with type 2 plug,type B RCD,OEM
The EA22-T is a mode 3 charging device and is intended for use on a dedicated circuit direct from a consumer unit through a suitable MCB and in accordance with building regulations. The unit is pre-fitted with a Type-A/B RCD.
DO NOT connect the device to an existing circuit, this device draws 32 amps of current.
It is intended for installation by a qualified person.¥ 0.00Buy now
-
E-Vehicle DC 3.3KW 72V 40A charger
This product not only has the advantages of high efficiency, small size, high stability, long lifespan,etc., fully sealed potting process and up to IP67 protection level ,which can work safely conditions In the short-term immersion condition, high reliability, complete protection function and other characteristics.¥ 0.00Buy now
-
E-Vehicle DC 2.2KW 72V 30A charger
This product not only has the advantages of high efficiency, small size, high stability, long lifespan,etc., fully sealed potting process and up to IP67 protection level ,which can work safely conditions In the short-term immersion condition, high reliability, complete protection function and other characteristics.¥ 0.00Buy now
-
E-Vehicle DC 1.5KW 72V 18A charger
This product not only has the advantages of high efficiency, small size, high stability, long lifespan,etc., fully sealed potting process and up to IP67 protection level ,which can work safely conditions In the short-term immersion condition, high reliability, complete protection function and other characteristics.¥ 0.00Buy now
-
7.2KW 230V 32A AC EV charging cables with type 2 plug
This type of EV portable charger is suitable for European standard EV.(IEC62196-2)¥ 0.00Buy now
-
22KW 400V 32A AC EV connector with type 2 plugs and 5m cables
This type of EV connector is suitable for European standard EV.(IEC62196-2)¥ 0.00Buy now
-
3.3KW 230V 16A AC EV portable charger with type 2 plug and 5m cables
This type of EV portable charger is suitable for European standard(IEC62196-2).
The suitable plug can be easy to connect with the customer's house power socket according to the user’s country’s standard.
If your EV can be charged by type 2 plug,you can choose it for charging your EV.¥ 0.00Buy now
-
EV Wall-mounted WIFI 22KW AC 400V 32A charging pile with type 2 plug and touching screen
The EA22S-T is a mode 3 charging device and is intended for use on a dedicated circuit direct from a consumer unit through a suitable MCB and in accordance with building regulations. The EA22S-T is pre-fitted with a Type-A/B RCD.
DO NOT connect the device to an existing circuit, this device draws 32 amps of current.
It is intended for installation by a qualified person.¥ 0.00Buy now
-
EV Wall-mounted WIFI 22KW AC 400V 32A charging pile with type 2 socket,RFID
The EA22S-B is a mode 3 charging device and is intended for use on a dedicated circuit direct from a consumer unit through a suitable MCB and in accordance with building regulations. The EA22S-B is pre-fitted with a Type-A/B RCD.
DO NOT connect the device to an existing circuit, this device draws 32 amps of current.
It is intended for installation by a qualified person.¥ 0.00Buy now
